The Amphibian Unitard -- complete!

I finally finished the amphibian unitard! Yay!

So, to summarize the whole process:

1. Patterned the unitard -- I checked all the measurements in comparison to the dress form I was using and to the unitard I had already made to make sure the ratios looked correct. I draped a hood pattern and melded that with the unitard to create a hooded unitard.

2. Dyed the fabric -- I dyed the white miliskin a neon green and dark blue. For the green, I mottle-dyed the fabric with blue and yellow, using shibori and selective dipping of the fabric. I then over-dyed the whole thing with florescent yellow. The dark blue/green is a combination of navy blue, turquoise, and green...it all got a little too dark, but I think it's fine.

3. Silicone-spotted the blue pieces -- At first I just made sheets of fabric with silicone...then I found that it was way more efficient and controllable to cut out the pieces and then silicone them instead.

4. Stitched the unitard together to make sure it fit and to place spots.

5. Basted on foam. Basted one layer of miliskin over the foam and finally basted the silicone-decorated material over that.

6. Took unitard off the form -- took out basting stitches so that unitard could lie flat.

7. Machine-appliqued the dots into place using a walking foot -- this was extremely challenging! I had to use the walking foot or it just didn't move, but fitting everything under that foot as well as the machine was probably one of the most exhausting things I've sewn!

8. Stitched the unitard back together.

9. Inserted invisible zippers at the shoulders

10. Stitched on the hood.

11. Prepped the sleeves with thumb-gloves.

12. Stitched on the sleeves.

And there you have it! A great learning experience building something completely from the bottom up. I had a lot of fun making this and I'm really happy with how it turned out! And thank you to David for being an awesome model!

Stretch Class: Final Project

As the end of the year is approaching, I've begun my final project in stretch techniques. I am making a unitard that will incorporate padding to create unique shapes and forms. This unitard is a full body one, including a hood.

So far, I've patterned it out, dyed the fabric, and basted it together to do a quick check on fit and to figure out the padded section patterns.

The base fabric is mottle-dyed/tie dyed a bit. I began with blue and yellow and then over-dyed the whole thing with fluorescent yellow to get more of a punch. The bulges are going to be in a darker blue/green color and will feature pebbling done with silicone caulking, which we did during fabric modification last year. I'm so excited to be bringing different techniques together!

Original Concept Sketch

Pebbling in progress

Pebbling Sample 1 w/ blue foil

The unitard fit well on the form I had made it for. I also had a thought -- I bet it would fit my friend who seemed to be about the same size. I took his measurements and compared -- pretty close! So, on a whim I did a quick fitting on him as a test...The only thing I found to alter was the arm which is a bit too large. Yay! Always cool to see what the garment does on a real person vs. the dress form. I also got to mark where to put the padding so that it corresponds better with musculature.

Mock-up Hood

So that's that for now. Next steps are to finish the pebbling so that I can make the hood and padded pieces. I need to pattern the padded pieces as well for both the foam and the stretch. I then need to take my basting stitches out and baste on the foam. I can then stretch the fabric over the foam and applique it on. Once this is finished, I just need to put it all back together, finish the edges that need finishing and put in the zippers! (There will be two zippers coming up from the shoulders and going up to the face).

Spring Awakening 4

More Photos!

 And so, Spring Awakening has finished! And, once again, I've learned so much! I am quite happy with how everything turned out. Of course I always get a bit frustrated with my sewing, but I know that the more I do this and practice and learn how things come together, the better it will get! For a first Victorian gown, I think it's pretty good!

The main thing I would change in looking back is the center front -- we needed a zipper opening as I wrote before, but it all looks a bit off center. The zipper is centered, but because it is a lapped zipper, the stitch line is off center. Especially with the thick fabric used in the front panels, I think it would have been better to off-set the zipper a bit in order to compensate.

In speaking with one of my professors, I learned that the puckering in the front can be caused a number of things: Seizing up in the because of the cording, a bone that is not quite long enough, problems in the flat-lining. Because this only seems to be happening on one side, we decided that it is most likely the cording...and thinking back, this was the side where I had to re-try putting on the cording a couple times before I got it right....so there ya go!

The rippling in the back is probably caused by the bones being a tad bit too short...I'm not entirely positive, but this seems likely. I learned that you can stitch across the bottom of the bone casing to keep everything secure and in place...seems pretty obvious, but I didn't think of it, so it's good to note for next time!

Though I like the pleating in the back, I liked it better in the muslin...different fabric, different behavior. I think for the silk I should have worked a bit more on the angle of the pleats. As it was, I didn't have enough length to work with it more. Again, live and learn!

Interesting note: I was worried that the sleeves were a little too tight, but we decided it was ok. After the first dress rehearsal the actress was actually a little bruised in the crook of her arms from the sleeves! I felt awful!! But, apparently the combination of the tension there and the type of fabric -- this fabric is thick, strong, and holds a fold-- created enough pressure to bruise. In a different kind of fabric this would have been fine. Crazy! So, I opened up the sleeves a bit to create more room and all was well. Just something interesting and unexpected...and a crazy demonstration of the power of fabric!

The costume looked great on stage -- everything seemed to move nicely. Things to be happy about, things to work on and lots learned! All is good!

Masks!

After finishing the latex mask (photo soon to come!), we worked on two more mask types: paper mache and thermo-formable. Both were started with a clay sculpt, just the same as the latex mask. The paper mache mask was built directly on the clay sculpt. We sealed the clay with a spray shellac and then began covering it with layers of paper mache. (50/50 water and white glue).

 

Once there were about 5 layers of paper mache, we cut the mask in two to get it off the form and then sealed it back together. After about 5 more layers, it was set to be painted. 

Thermo-formable mask:

 We covered the thermo-formable plastic with leather and then painted it with leather dye and lined with felt.

Spring Awakening Cont. 3

The Corset -- Almost finished!

Again, I'm really happy with how this is turning out -- it's almost there! I still need to finish cross-stitching the lace on the inside, add a waistband on the inside, and add this super fancy applique to the outside top edge. Phew! I think where I still get the most frustrated is with my stitching...I've definitely gotten infinitely better in just this past year and a half, but I'm still very much a beginner...it all just takes time and practice and I must always remind myself that nothing is perfect the first time you try it! :D がんばってね！

Spring Awakening Cont. 2

Fabric fitting:

Not too many changes to make -- I will be making the collar a bit shorter and working with the skirt pleats a little to see if I have enough fabric to make them a bit deeper -- the fabric is just a lot thicker than the muslin. Almost there!

Spring Awakening Cont.

The muslin fitting:

A good fitting! I was really happy with how everything turned out. The pleats on the skirt need to be readjusted a bit in the back. The bodice needs a little adjusting -- a little more space where that drag line is above the bust. A bit of reshaping of the seams in front to curve a bit more over the bust down to the waist. Bringing the armscye in the back a bit in to create a bit of a narrow shoulder illusion. I was least happy with the sleeve and collar...mainly, I didn't have as much time with them as I would have liked, so they just weren't quite up to snuff. I'll re-work the collar completely and take a look at the sleeve pattern. Collars do tend to be my weak spot...I'll just keep working at them, crazy collars!